Rotary Automatic Sealing Machine Pouch Cell Sealing Equipment 6pcs/Time

This machine is suitable for vacuum sealing and trimming of pouch cell  lithium battery. The machine is a rotating disc type four-station fixture rotation structure, the three fixtures take turns to discharge into vacuum packaging, cutting station, clamping battery time does not affect the efficiency of the equipment. After the battery is put into the jig on the turntable, press the start button, the turntable rotates 900, the first station is the air pumping sealing working area, the vacuum chamber is closed, the vacuum pump begins to vacuum, the vacuum degree in the vacuum chamber to a certain low set value, the bayonet action, puncture the air bag, to avoid the battery internal contact with the air. When the vacuum degree in the vacuum chamber reaches the limit vacuum degree, the sealing action is applied to complete the sealing. The second station is the edge cutting station, the upper cylinder drives the upper knife, and the lower cylinder drives the lower knife to cut the edge.

Cavity 1: Sealable battery size: L*W*T=103mm*67mm*(0.2-2.5)mm, can be packaged at the same time 3pcs

Cavity 2: Sealable battery size: L*W*T=103mm*67mm*(0.2-2.5)mm, can be packaged at the same time 3pcs

Main feature

Panasonic PLC and Willon touch screen

Divider and drive motor

Airtac Air cylinder

Panasonic temperature controller

Digital display Japan SMC vacuum meter

• Three-station turntable, positioning accuracy: ±0.05mm
• Head operating temperature range: indoor temperature to 2500C
• Temperature control accuracy: ±20C
• Head encapsulation time: 1-99 seconds adjustable
• The battery vacuum press plate is compressed with spring and cylinder, which can ensure that the vacuum battery is more flat when the battery variety is changed frequently
• There is an electrolyte recovery tank on the turntable, which is easy to clean and recover the electrolyte
• The vacuum pipeline is equipped with electrolyte filter device, which can effectively protect the electrolyte backflow to the vacuum system and corrode the vacuum system
• The upper seal adopts the double connecting rod structure of the cylinder, which can effectively ensure the parallel operation of the upper seal
• The bayonet is within 10 mm from the seal, the bayonet is arranged densely, and it is common for the battery of sealing size
• Time accuracy: ±0.1 seconds
• Upper and lower copper heat head, width: 3.2mm+3.2mm, total width =6.4mm
• Head length: 250mm
• The vacuum degree can reach more than -95Kpa
• Touch screen has error display function, manual function, easy to adjust the machine
• Aluminum frame, plate gold baking white paint, machined parts for rust prevention